Rental properties in Suncrest need a different kind of attention than a homeowner job does. A landlord cannot always be on site, a tenant cannot always describe what is wrong with precision, and the panel in a house that has changed hands several times may have circuits that nobody labeled and additions nobody documented. We handle that kind of work regularly, and we know how to scope it on the phone before the visit so there are no gaps between what was expected and what the job turned out to be.
We serve Suncrest and the surrounding area, seven days a week from 7:00 AM to 10:30 PM. Whether you manage a single rental house or several properties across the area, we work around tenant schedules, confirm the scope before anything starts, and leave the property the way we found it.
Call (208) 444-9356 and we will get the job scoped and on the calendar.
When you call about an electrical job, the first thing we do is ask about the situation. What is happening, where in the property it is happening, and what the panel looks like if you can see it. That conversation is where a quote takes shape. A straightforward outlet replacement has a different scope than tracing a fault through a circuit that loses power intermittently, and those two jobs carry different rates because the work involved is genuinely different.
Three things move a quote once the job is underway. The first is what the fault actually turns out to be once we get eyes on it, because a symptom and a cause are not always the same thing. The second is what has to be opened up to reach the problem, which in an older house can mean working through walls or ceiling runs that were not part of the original picture. The third is whether the existing panel or circuit can carry whatever change is being made. Adding a circuit for an EV charger or a backup generator hookup is a different job if the panel needs to come up in capacity first.
The rate is confirmed on the call before we schedule the visit. If the scope shifts after we arrive and get a look at the actual condition, we tell you before we proceed. Nothing is added without your agreement.
Call (208) 444-9356 and describe what you are dealing with, and we will tell you what the job involves and what it will cost.
Getting your electrical problem handled starts with a quick call. For most jobs, that call is where we confirm the scope, settle the rate, and pick a time. We are available every day from 7:00 AM to 10:30 PM, which means you can reach us on a Saturday evening or a Sunday morning without waiting until the next business day to get answers.
When a problem will not keep, we take short-notice work and can schedule around what the calendar allows. For rental properties where a tenant needs to stay in the home, we work around what the occupant needs and confirm the access plan before we arrive. For a business that has to stay open during the work, we talk through which circuits will be affected and for how long so operations can plan around it. The person who answers the phone knows the trade and can scope the job before the visit is booked.
Electrical work that changes the service, adds new circuits, or alters the panel generally requires a permit, and that is true whether the property is in a town or in an unincorporated part of the county. The specific requirements vary by jurisdiction, so we confirm what applies to the address before the job starts rather than assuming the rules are the same everywhere.
When a permit is required, we handle the process from start to finish, including coordinating the inspection before the circuit is put back into service. Inspection timing affects the schedule, and we account for that when we book the job. Nothing gets closed out without the sign-off it needs. Wiring work checked against code before sign-off is part of every installation.
In an apartment or condo, the main panel is not always where a homeowner would expect it. Common locations include a hallway closet, a utility room shared with the building, or a locked mechanical space that the property manager controls. Knowing where the panel is before the visit saves time, and we ask about it on the call.
When part of the electrical service is shared across units, the boundary between what is inside the property and what belongs to the building matters. A tenant can call about a dead outlet or a tripped breaker inside the unit, but if the fault is upstream in a shared panel or a common-area circuit, the property manager or building owner is the right person to authorize the work. We help sort out which side of that line the problem is on, and we can work with whoever needs to be involved to get it resolved.
A panel with missing or incorrect labels is a problem that shows up in older homes and properties that have been added to over the years. Homes in this area were wired in different decades, and it shows in the panels. We trace each circuit, confirm what it feeds, and label the panel so anyone working on the property knows exactly what they are dealing with. This is often the first step before a larger project, because knowing what the panel actually contains changes what the upgrade or repair involves.
A 100-amp service made sense for the loads a house carried when it was built. It does not always make sense for the loads a household runs today, especially in a region where electric heating, EV chargers, and modern appliances all draw from the same panel. A service upgrade involves replacing the panel, updating the service entrance if needed, and confirming the new installation meets current code. We do the load calculation as part of the process so the new service is sized for what the property actually draws, not just what it drew when it was last touched.
A three-way switch lets you control a light from two different locations, and a multi-location setup extends that to three or more. The wiring behind these is more involved than a standard single-pole switch, and getting it wrong means a switch that works from one end but not the other. We handle new installations and replacements, including when an existing three-way setup has developed a fault that makes one of the switches unreliable.
An outdoor outlet that is not properly enclosed is a code issue and a safety problem. We install weatherproof outlets and in-use covers for exterior locations, including garage walls, covered patios, and outbuildings. In a region where temperature swings and moisture are routine, the enclosure matters as much as the outlet itself. GFCI protection is part of every outdoor outlet installation, and we confirm the circuit feeding it is correctly protected before the job is closed out.
Arc-fault and ground-fault breakers, subpanel installation for detached garages or outbuildings, recessed and LED lighting, knob-and-tube replacement, electrical safety inspections, and EV charger circuits are all part of the work we handle regularly. If you are not sure which of those applies to your situation, describe what you are seeing and we will tell you what the job involves.
We serve Suncrest and cover Stevens County broadly, including the communities around it. Nearby towns and neighborhoods we work in regularly include Fairwood, Country Homes, Town and Country, Deer Park, and Clayton.
If you are in the area and need electrical work done, call (208) 444-9356 and we will confirm coverage and get the job scheduled.
We make the fix and leave it tidy. For the full list, go to our services page.
Homes built several decades ago were wired for the loads people ran at the time, and those loads have changed considerably. Panels that were adequate then may not have the capacity for modern appliances, electric heating circuits, or an EV charger. Knob-and-tube wiring, aluminum branch circuits, and panels without arc-fault or ground-fault protection are all more common in older homes, and any of them can come up during a repair or inspection. We explain what we find and what it means before recommending any additional work.
Yes. We work around tenant schedules and confirm the access plan before the visit. We let the tenant know which circuits will be affected and for how long, and we keep the disruption to what the job actually requires. If the work needs the main power off for part of the visit, we confirm that on the call so everyone can plan around it.
A short description of what the tenant reported and where in the property it is happening is usually enough to get started. If you know whether the panel is accessible and whether the circuit has tripped, that helps too. We scope the job on the call and confirm the rate before anything is scheduled, so you know what the visit covers before we arrive.
Power to a detached structure requires its own circuit run from the main panel, and in most cases the cable has to be buried to meet code requirements for outdoor wiring. The depth and method depend on the type of cable used and what the local code requires. We confirm the specifics on the call and handle the run from panel to structure.
Work on the meter or service entrance involves the utility as well as the electrical work inside the property. We handle the panel and interior wiring side and coordinate with the utility where their involvement is required. We explain on the call what falls on each side and what the process looks like.
One call gets the job scoped, the price confirmed, and the visit scheduled. We are available every day from 7:00 AM to 10:30 PM.
Reach out to Coeur d'Alene Electrical Company at (208) 444-9356.
We trace the fault. We fix the wiring. We restore the power.
View our town-by-town list. Also serving: Fairwood, Country Homes, Town and Country, Deer Park.
Below is a breakdown of the electrical work we handle across Coeur d'Alene and the surrounding Stevens County area. Each service is scoped on the call before anything is scheduled, and the price is confirmed before work begins. Whether the job is a straightforward outlet replacement or a full panel upgrade, the process is the same: we find the fault, explain what it involves, and get it handled to the code inspectors here enforce.
| Electrical Service | What the Job Involves | When You Need It | Worth Knowing |
|---|---|---|---|
| Heat Tape Installation | Dedicated circuit for heat tape systemGFCI protection at the outletLoad sizing for total tape footageRoof and pipe application wiring | Idaho homeowners managing frozen pipes or roof ice dams through the winter months | Heat tape is an electrical installation, not a plug-in fix. A dedicated circuit and proper GFCI protection are required for the system to run safely. |
| Ceiling Fan Installation | New fan wiring and mountingFixture replacementSwitch and remote wiringBox reinforcement where needed | Bedrooms, living rooms, and covered outdoor spaces adding or replacing ceiling fans | Older ceiling boxes are often not rated for a fan's weight and movement. We check the box before the fan goes up. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgradesLoad calculationsBreaker panel replacementSubpanel additions for garages and outbuildings | Older homes that cannot carry modern electrical loads or are running out of circuit capacity | A load calculation is part of every upgrade so the new service is sized for what the home actually draws, not just what it drew when it was built. |
Call (208) 444-9356 to get a price on the job and find out what the work involves before anything is scheduled.
(208) 444-9356