Older homes in Post Falls were wired for a different era. The panels were sized for fewer circuits, the outlets were placed where a smaller household needed them, and the wiring ran through walls that have since been opened, added to, and closed again by people who were not electricians. That history shows up in the calls we take: a breaker that trips under a load it should handle, an outlet that stopped working for no obvious reason, a panel with every slot filled and no room for what the house needs next. We handle all of it, from a single dead outlet to a full service upgrade, every day from 7:00 AM to 10:30 PM.
We cover Post Falls for the full range of residential and commercial electrical work. Homeowners dealing with aging wiring, landlords keeping rental units up to code, and businesses running equipment that the original circuits were never designed for all call us for the same reason: the job needs to be done correctly and the scope needs to be clear before work starts.
Call (208) 444-9356 and we will walk through what you are dealing with before anything is scheduled.
Getting your electrical problem handled starts with a quick call. But some situations do not give you the option of waiting for a convenient time, and we take short-notice work when the schedule allows. A burning smell near a panel, an outlet that is warm to the touch, or a breaker that will not stay reset are the kinds of problems that need attention the same day, not next week.
For rental properties and commercial spaces, timing matters differently. A tenant who has lost power to part of a unit, or a business that cannot shut down a section of the building, needs the work scoped and scheduled around what is actually possible. We work through that on the call, so the visit is planned before anyone shows up. That includes confirming who will be on site and what access is needed, which matters more on a multi-tenant property than it does in a single-family home.
We are available every day, including weekends and evenings, so the call does not have to wait for Monday morning. Pick up the phone and we'll get rolling.
What a job costs depends on what the job actually is. A single outlet replacement and a panel upgrade are not quoted the same way, and they should not be. When you call, we ask about the situation, the property, and what you are trying to accomplish, and we give you a rate based on that specific scope.
A few things move the number once the job is underway. What the fault turns out to be once we get into the circuit. Whether reaching the wiring means opening a wall or pulling a fixture. Whether the existing panel has the capacity to carry a new circuit without a service upgrade first. None of those are surprises if we talk through them on the call, which is exactly what that call is for.
The rate is confirmed before we schedule the visit. That covers the work as scoped on the call, and if the scope changes after we get eyes on it, we tell you before we proceed. The price for the additional work is agreed before it happens, not added to the invoice afterward.
Some electrical work requires a permit and a follow-up inspection before the circuit is put back into service. When that applies, we handle the process and confirm the inspection before the job is closed out. We tell you on the call whether the work you are describing falls into that category. Wiring work checked against code before sign-off is part of every installation.
Electrical work in an apartment or condo follows a different path than a single-family home. The panel is often in a utility closet, a shared hallway, or a space that is technically part of the building's common infrastructure rather than the unit itself. That matters when a circuit needs to be traced or a breaker replaced, because the panel may not be fully accessible without involving building management.
In a shared-service building, some of the wiring and protection is the building's responsibility and some belongs to the unit. GFCI and AFCI protection at the outlet level is typically inside the unit and straightforward to address. A panel that is shared across floors or wings is a different conversation, and we will tell you on the call which side of that line your situation falls on. The person who answers the phone knows the trade and can scope the job before anyone is sent out.
Properties get asked to run things they were never wired for. An EV charger on a panel that was sized for a much smaller load. A workshop in a detached garage that needs its own circuits rather than an extension cord running from the house. A kitchen appliance that keeps tripping the breaker because it shares a circuit with three other things.
The first question is always whether the existing panel can carry the addition. We do a load calculation as part of any circuit or panel work, so the answer is based on what the house actually draws rather than a guess. If the panel cannot take the new load, a service upgrade and the new circuit get handled together. If it can, the dedicated circuit is all that is needed.
A detached garage or workshop that needs real electrical capacity usually needs its own subpanel rather than a long run of extension cords or a single circuit pulled from the house. A subpanel in a detached structure gives the space its own breakers and the capacity to run equipment without pulling the main panel down. We size the subpanel for what the space will actually be used for, not just for what it needs today.
Replacing a fixture is straightforward. Wiring a new fixture where there was no box before is a different job, and so is converting a switched outlet to a ceiling fixture. We handle all three, and we confirm which one applies to your situation before the visit.
Recessed lighting changes how a room reads, and LED retrofits cut the load on the circuit considerably. We run the wiring, place the cans or housings, and confirm the circuit can carry the layout before anything goes into the ceiling. For older homes where the attic is accessible, the job is cleaner than it looks.
Intermittent faults are the hardest electrical problems to diagnose because they do not show up on demand. A breaker that trips three times a week but resets fine every time, or a light that flickers only under certain conditions, requires tracing the circuit rather than replacing the obvious part. We trace the fault. We fix the wiring. We restore the power.
An unlabeled panel is a problem that shows up at the worst possible time. We test and label every circuit so the panel reflects what is actually in the house, not what someone guessed when the home was last sold. This is also where arc-fault and ground-fault breaker coverage gets confirmed, and where grounding and bonding issues tend to surface.
A subpanel for a detached structure means the garage or workshop has its own breakers, its own capacity, and its own grounding. The run from the main panel to the subpanel is sized for the load the space needs to carry, and the installation is done to the code inspectors here enforce.
We serve Post Falls and the surrounding area across Kootenai County. Nearby communities we cover include Hauser, State Line, Huetter, Rathdrum, and Otis Orchards-East Farms. If you are in one of those communities or somewhere between them, call and we will confirm the schedule. Dead outlets usually have a simple cause worth finding, and the same is true wherever in the county you are calling from. You will find the rest of it on our electrical service list.
Yes. We serve Post Falls and the surrounding communities across Kootenai County, including Rathdrum, Hauser, Huetter, State Line, and Otis Orchards-East Farms.
Call (208) 444-9356 and we will confirm availability for your address when you describe the job.
We work on vacant properties regularly. Access is arranged in advance, either through a key holder, a property manager, or another arrangement confirmed on the call. We do not need the owner present as long as access is provided and the scope is clear before we arrive.
A buzzing or humming from the panel can point to a loose connection, a failing breaker, or a load imbalance on the circuits. It is worth having looked at rather than ignored. Call us and describe what you are hearing and we will tell you what the visit would involve.
Older homes in this area tend to have panels that were sized for a smaller load than they now carry, outlets that lack GFCI or AFCI protection where current code requires it, and wiring that has been added to over the years without a clear record of what runs where. Intermittent breaker trips, dead outlets on a shared circuit, and panels with no open slots are the calls we take most often. We trace the problem back to the source rather than patching the symptom.
Outdoor lighting requires weatherproof wiring and fittings rated for exterior use, and in most cases the circuit runs back to the main panel. Low-voltage landscape lighting uses a transformer that plugs into an exterior outlet, while line-voltage fixtures need a dedicated outdoor circuit. We confirm which approach fits the installation and scope the work from there.
A breaker that trips at predictable times, such as when a large appliance cycles on, usually means the circuit is being pushed past its rated capacity at that moment. It can also point to a breaker that is weakening and trips under a load it should be able to handle. We trace the pattern back to the cause rather than just resetting it.
A new heating or cooling unit may require a dedicated circuit and a disconnect, and the panel needs to have the capacity to carry the added load. We handle the electrical side of that installation, which includes running the dedicated circuit, installing the disconnect, and confirming the panel can support the new equipment. The unit itself is the HVAC trade's territory, but the power supply to it is ours.
Let building management know you are scheduling electrical work, particularly if the panel is in a shared space or if the circuit you need accessed runs through common infrastructure. We will tell you on the call which parts of the job are inside your unit and which may require building access or coordination. Having that conversation before we arrive makes the visit go faster and avoids a second trip.
Local means we care what the neighbors think. That shows up in how we handle the call, how we scope the job, and how we close it out. The rate is confirmed before we schedule. The work is checked before we leave.
Call (208) 444-9356 and we will tell you what the job involves and what it costs before anything is on the calendar.
The rest are on our town-by-town list. Also serving: Rathdrum, Otis Orchards-East Farms, Hayden, Liberty Lake.
Below is a breakdown of the electrical work we handle across Coeur d'Alene and the surrounding Kootenai County area. Each service is scoped on the call before anything is scheduled, and the price is confirmed before work begins. Whether the job is a straightforward outlet replacement or a full panel upgrade, the process is the same: we find the fault, explain what it involves, and get it handled to the code inspectors here enforce.
| Electrical Service | What the Job Involves | When You Need It | Worth Knowing |
|---|---|---|---|
| Dedicated Appliance Circuits | Ranges, dryers, and refrigeratorsWorkshop and garage equipmentHome office circuitsLoad sizing for each appliance | Homeowners adding a major appliance or workshop equipment that cannot share a circuit | A shared circuit that is already near capacity is not the right answer for a large appliance. We size the dedicated circuit to the actual draw of the equipment. |
| Backup Generator Installation | Transfer switch installationGenerator hookup and wiringLoad calculation for the panelStandby and portable generator connections | Homeowners and businesses preparing for multi-day winter outages in Kootenai County | The transfer switch is what keeps utility and generator power from running at the same time. It is not optional, and it needs to be installed correctly the first time. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgradesLoad calculationsBreaker panel replacementSubpanel additions for garages and outbuildings | Older homes that cannot carry modern electrical loads or are running out of circuit capacity | A load calculation is part of every upgrade so the new service is sized for what the home actually draws, not just what it drew when it was built. |
Call (208) 444-9356 to get a price on the job and find out what the work involves before anything is scheduled.
(208) 444-9356