Cheney is a small city with a real mix of properties: older rental houses near the university, mid-century homes on original wiring, newer construction on the edges of town, and a handful of commercial and agricultural operations scattered through the area. The electrical work those properties generate is not all the same. An older house may need grounding corrections, aluminum wiring remediation, or a panel that was never sized for what it carries today. A newer build might need a dedicated circuit for a workshop or a Level 2 EV charger. We handle all of it, and we are available every day from 7:00 AM to 10:30 PM.
Landlords with rental units, homeowners dealing with a fault they cannot pin down, and small business owners who need a circuit added without shutting down for a day all call for different reasons. What they get is the same: a price on the phone before anything is scheduled, and work done to the code inspectors here enforce. We cover Cheney and the surrounding area, and this page is where that starts.
When you call, we ask about the situation and scope the job on the phone. That is where the price comes from. It is not a guess and it is not a range that shifts once we arrive. It is a number tied to what the job actually involves.
Three things tend to move a quote. The first is what the fault turns out to be. A tripping breaker might be a failing breaker, an overloaded circuit, or a wiring fault behind the wall, and each of those is a different job. The second is access. Reaching a junction box inside a finished wall takes more time than reaching one in an open basement. The third is whether the existing panel can carry the change. Adding a circuit to a panel that is already at capacity is not the same job as adding one to a panel with room to grow. A load calculation is part of that conversation.
We confirm the price before we schedule the visit. If the scope changes after we get eyes on it, we tell you before we proceed. That is the process, and it is the same whether the job is a single outlet or a full service upgrade.
The jobs below come up regularly in properties like the ones here. Some are quick repairs. Some are installations that take most of a day. All of them start with a call where the scope gets confirmed.
A range, a dryer, a large refrigerator, or a dishwasher each needs its own circuit. Sharing a circuit with other loads is how breakers start tripping under normal use. We run the dedicated line from the panel to the appliance location and size the breaker for what the equipment draws.
A welder or an air compressor draws a load that a standard household circuit cannot carry. Properties in this area with detached garages, shops, or outbuildings often need a subpanel or a dedicated high-amperage circuit run from the main panel. We handle the wiring, the breaker sizing, and the outlet type the equipment requires.
Older homes frequently have grounding that was not required when the house was wired and was never added later. Missing or improper grounding shows up during inspections and during troubleshooting when a fault path is not behaving as expected. We trace what is there, identify what is missing, and bring the system up to current requirements.
Properties outside the city center sometimes rely on a well pump, and that pump needs its own dedicated circuit with the right wire gauge and breaker rating for the motor load. Irrigation systems have similar requirements. We size the circuit correctly from the start so the pump runs without nuisance tripping and the wiring holds up through a full season of use.
Battery-only detectors are not required to be interconnected, which means a detector going off in one part of the house may not alert someone in another. Hardwired alarms with battery backup are interconnected across the home and meet current code for new and renovated properties. We run the wiring, connect the alarms, and confirm the interconnect is working before we leave.
Most panels in Cheney homes sit in a basement, a utility room, a garage wall, or a hallway closet. Knowing where yours is before we arrive saves time. If access requires moving stored items or unlocking a secondary space, having that cleared in advance means the job starts sooner.
For rental properties, the panel is sometimes in a shared space or a locked mechanical room that a tenant does not control. Coordinating access before the visit rather than on the day makes the difference between a smooth job and a delayed one. We confirm the access plan on the call.
Older homes in this area sometimes have panels that were added to over the years without a clear record of what circuit goes where. We trace and label as part of the job when the panel is not already mapped. Arc-fault and ground-fault breakers are part of the conversation on those properties too, since current code requires AFCI and GFCI protection in locations that older installations often lack.
Some electrical problems are inconvenient. A dead outlet in a spare room, a switch that stopped working, a ceiling fan that needs replacing. Those get scheduled at a time that suits you. Other problems are not in that category. A sparking outlet, a burning smell near the panel, a breaker that trips and will not stay reset, partial power loss to a room. Those need attention before they get worse, and we take short-notice calls within our published hours.
For businesses and rental properties that cannot go dark during the workday, we confirm what will be without power and for how long before we schedule. That lets a tenant plan around it or a business owner decide whether to schedule before opening or after close. We do not show up and start pulling circuits without that conversation first.
The person who answers the phone can tell you what the visit involves. That includes what access is needed, what the likely scope is, and what the visit will cover before anyone is dispatched.
Who books the job and who receives the invoice are not always the same person on a rental property. A landlord may schedule the work and want the invoice sent to a property management address, while the tenant is the one who needs to be home to provide access. We work through those details on the first call so nothing gets tangled up on delivery day.
After the job is done, we can tell you what was found, what was repaired or installed, and what the panel condition is. That is useful to have on record, particularly for a landlord managing multiple units or a property that changes hands. If a follow-up is needed, we note it clearly so you know what to plan for.
We protect your floors and finishes while we work, and we leave the space the way we found it. That matters in a lived-in rental as much as it does in an owner-occupied home.
Before a small wiring issue turns into a hazard, it is worth knowing what it would actually take to fix it.
The outlet that has never worked since you moved in is usually a tripped GFCI somewhere upstream on the same circuit, a loose connection at the back of the receptacle, or a wiring fault at the junction box. It is rarely expensive to fix and almost always simple to diagnose. The switch that sparks when you flip it is a different matter. A small arc at the contacts is normal on a mechanical switch. A visible spark, a burning smell, or discoloration around the faceplate is not. That is a connection that is failing, and it does not improve on its own.
The outside light that nobody has gotten around to replacing is the easiest call to make. A fixture that has been dead for a season is not a priority until it is. Then it is a safety issue and a scheduling problem at the same time. One call handles all three. We make the fix and leave it tidy.
We serve Cheney and cover the surrounding area throughout Spokane County. Nearby communities we work in regularly include Four Lakes, Medical Lake, Spangle, Airway Heights, and Spokane. If you are in one of those towns or somewhere between them, call and we will confirm what is available.
Coverage means the same thing regardless of which town you are in. The job gets scoped on the call, the price gets confirmed before we schedule, and the work gets done to the same standard. We are available every day from 7:00 AM to 10:30 PM. Anything not covered here is on our wiring and panel services page.
We need clear access to the panel to do the work safely. If the panel is behind stored belongings, clearing a path before we arrive will save time and keep the visit on schedule. Let us know when you book if access might be an issue and we will talk through it.
Rental homes in this area tend to need outlet and switch replacements, GFCI protection in kitchens and bathrooms, panel inspections before a new tenancy, and dedicated circuits where a tenant has added high-draw appliances. Older rental stock sometimes needs grounding corrections or aluminum wiring attention at connection points. We scope each job on the call and confirm what the visit covers before we schedule.
If neighboring properties have power and yours does not, the fault is likely on your side of the meter rather than the utility's. That could be a tripped main breaker, a failed service connection, or a fault at the service entrance. Do not repeatedly reset a main breaker that will not stay on. Call us and describe what you are seeing, and we will tell you what the visit involves and get it scheduled.
In some cases, yes. Where wiring needs to run under a floor, we assess whether the boards can be lifted and relaid without damage. In finished spaces where that is not practical, we discuss alternative routing before any work starts. We do not pull up flooring without confirming the plan with you first.
Work on the meter or service entrance involves the utility as well as the electrical work inside the property. We handle the panel and interior wiring side and coordinate with the utility where their involvement is required. We explain on the call what falls on each side and what the process looks like.
We confirm the access plan before the visit, whether that means a key holder, a lockbox code, or a property manager letting us in. The scope and the price are settled on the call, and we confirm the access arrangement at the same time so there are no gaps when we arrive.
Yes. The regional winters bring freezing temperatures that put exposed pipe runs at real risk, and heat tape is an electrical installation that requires a dedicated circuit, GFCI protection, and correct load sizing. We handle the wiring from the panel to the connection point and confirm the circuit is properly protected before the system is put into service. If you are not sure whether your current setup was wired correctly, a call is the right place to start.
When you call, you reach someone who knows the trade and can scope the job on the phone. Careful diagnosis. Code-compliant work. Professional service.
Call (208) 444-9356 and we will confirm the price and get the work on the schedule. The job gets done properly and left tidy.
The rest are on our town-by-town list. Electrical service reaches these neighboring areas too: Airway Heights, Spokane, Town and Country.
Below is a breakdown of the electrical work we handle across Coeur d'Alene and the surrounding Spokane County area. Each service is scoped on the call before anything is scheduled, and the price is confirmed before work begins. Whether the job is a straightforward outlet replacement or a full panel upgrade, the process is the same: we find the fault, explain what it involves, and get it handled to the code inspectors here enforce.
| Electrical Service | What the Job Involves | When You Need It | Worth Knowing |
|---|---|---|---|
| Whole-Home Surge Protection | Panel-mounted surge protector installationWhole-house voltage spike protectionProtection for appliances and electronicsCoordination with panel upgrade if needed | Homeowners with sensitive electronics or properties in areas prone to outages and power fluctuations | A surge protector at the panel covers every circuit in the house, not just the devices on a single strip. One spike event can cause damage across multiple rooms. |
| Breaker & Fuse Repair | Failed breaker replacementFuse panel assessmentOverload diagnosisArc-fault breaker installation | Circuits that trip repeatedly or breakers that will not hold a reset | A breaker that trips under normal load is usually telling you something about the circuit, not just the breaker. We check the run before swapping the part. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgradesLoad calculationsBreaker panel replacementSubpanel additions for garages and outbuildings | Older homes that cannot carry modern electrical loads or are running out of circuit capacity | A load calculation is part of every upgrade so the new service is sized for what the home actually draws, not just what it drew when it was built. |
Call (208) 444-9356 to get a price on the job and find out what the work involves before anything is scheduled.
(208) 444-9356